•
“Dest”
– destination field of a weather report packet.
•
“Path1”, “Path 2”
– up to 2 components of APRS path, if you leave this field
empty, packet will be sent without path,
•
“RF[min]”
- packet transmit rate to RF (expressed in minutes), packet will not be
sent if this field is set to 0,
•
“Enable if”
- beacon enable condition:
•
“Never”
- beacon disabled,
•
“Always”
- beacon enabled,
•
“GPS fixed”
- beacon enabled if GPS fixed,
•
“Send position“
– selects between dynamic position from GPS and static position
from “Latitude”, “Longitude” fields in “Radio” Tab,
•
“Comment”
– weather report comment.
8.11. External interfaces Tab
This Tab is related to settings of all external devices and interfaces which may be
connected to APRS Voyager.
8.11.1. External interfaces / Serial ports
•
„Bluetooth port 1”
- selection of Bluetooth port function,
•
„RS-232 port 2”
- selection of RS-232 port function.
APRS Voyager incorporates only one RS-232 serial interface (contrary to PLXTracker or
PLXDigi), located on „RS-232 port 2” pins (port 1 is internally occupied by Bluetooth
interface).
If you wish to use a weather station, serial console, etc., you will need a different set of
serial cables than for PLXTracker or PLXDigi.
24