Micronics Portaflow 222, Руководство пользователя

Страница: 36 / 57

Portaflow 222 & 333 User Manual Micronics
Page 32 Issue 3.1 Feb 20
Real Time Logge DD-MM-YY HH:MM:SS
Site name Site03
File Name Site03.csv
Logging Interval 5.0 min
Units mins
Line Ending Format Unix
Flow Units l/min
Power Units MW
->Stop NOW..
Set Auto Start..
Exit
Data Logger DD-MM-YY HH:MM:SS
Choose from list of sites..
Site name
QuickStart
Logger Status..
->Copy Log..
Clear log..
List all Logs..
Exit
4. Duration shows the logging period calculated from the Start and Stop times.
5. Select Save Setup & Exit and press the ENTER key to return to the Real Time Logger screen.
5.3 File naming
If you choose to save the existing log it will be saved to the highest number site that does not
currently have an attached log (e.g.
Site19 , Site18 .... etc). The name of the site to which the log is
saved will be changed to CopyQS_xx (where xx is a numerical value which is incremented each
time a log is saved). For example: if Site19 is available when you elect to save the log, the log is
saved to Site19 and the sitename is changed to CopyQS_1 . Files are saved in CSV file format.
NOTE: WHEN SETTING UP A NAMED SITE IT IS ADVISABLE TO RUN A BRIEF LOGGING
SESSION ON THE NEW SITE TO ESTABLISH A DATA LOG FILE, AS THIS WILL PREVENT
THE SITE NAME BEING OVERWRITTEN WHEN SAVING THE QUICKSTART LOG, AS
DESCRIBED ABOVE.
5.4 Stopping logging
From the FLOW READING screen, press the Logger function key to access the REAL TIME
LOGGER screen.
1. Press the Logger function key (1) to access the
Real Time Logger screen.
2. Select STOP NOW to cease logging.
NOTE: THE STOP NOW OPTION REPLACES THE
START NOW COMMAND WHEN LOGGING IS
ACTIVE.
3. Confirm the action when prompted.
4. Select Exit to return to the READ FLOW screen.
NOTE: THE LOGGED DATA WILL REMAIN STORED
IN THE INSTRUMENT’S
MEMORY AND
CAN BE ACCESSED AT ANY TIME AS DESCRIBED ABOVE.
5.5 Copying logged data to a USB memory stick
This procedure describes how to copy a stored log
file to a USB memory stick.
1. Connect the memory stick to the Portaflow USB
socket (see page 6).
2. Access the MAIN menu.
IMPORTANT: IF THIS IS DONE FROM THE FLOW READING SCREEN ANY LOGGING
CURRENTLY TAKING PLACE WILL BE TERMINATED.
3. Select Data Logger from the MAIN menu.
4. Select Choose from list of sites and select the name of the site to download.
5. When you are ready to begin downloading the log select Copy log .