Micronics Portaflow 222, Руководство пользователя

Страница: 23 / 57

Micronics Portaflow 222 & 333 User Manual
Issue 3.1 Feb 20 Page 19
PF333HAB MAIN DD-MM-YY HH:MM:SS
->Quick start..
View / Edit Site Data..
Setup Instrument..
Data Logger..
Read Flow..
Read Energy..
Pipe Outside Di DD-MM-YY HH:MM:SS
->Pipe outside diameter 114.30 mm
Pipe circumference 359.08 mm
Continue..
Main Menu..
Pipe Wall Thick DD-MM-YY HH:MM:SS
->Pipe wall thickness 8.00 mm
Continue..
Main Menu..
Pipe Wall Mater DD-MM-YY HH:MM:SS
->Pipe wall material Plastic
Continue..
Main Menu..
3 USING THE QUICK START MENU
If you want to perform a ‘one
-
off’ flow reading at a particular pipe location the
Quick start menu
provides the quickest way to set up the Portaflow system and access the FLOW READING screen.
If the point at which you intend to take the measurement is likely to require regular monitoring it is
best to set it up as a
‘Site’ within the Portaflow
, which then stores the site parameters (See Chapter
4).
Before you can use the Portaflow system you need to obtain the following details (this information
will be required when setting up the Quick Start menu):

Pipe outside diameter.

Pipe wall thickness and material.

Pipe lining thickness and material.

Type of fluid.

Fluid temperature.
3.1 Entering the site data
1. Select Quick Start from the MAIN MENU and
press the ENTER key. You will then be
presented with a series of screens in which to
enter the data mentioned above.
2. Enter the pipe
’s
outside diameter (15
–
2000
mm or its circumference (47.1
–
6283.2 mm).
When you enter one value the other is
calculated from it.
Select CONTINUE and press the ENTER key.
3. Enter the pipe wall thickness (0.5
–
50 mm).
Select CONTINUE and press the ENTER key.
4. Choose the pipe wall material: Plastic/Cast
Iron/Ductile Iron/Copper/Brass/Concrete/
Glass/Other (m/s)/Mild Steel/
S'less Steel 316/S'less Steel 303
.
Select CONTINUE and press the ENTER key.