Micronics Portaflow 222, Руководство пользователя

Страница: 22 / 57

Portaflow 222 & 333 User Manual Micronics
Page 18 Issue 3.1 Feb 20
System Settings DD-MM-YY HH:MM:SS
..Lock-screen Timeout 90 sec
->Back-light mode ON
Back-light Timeout 75 sec
Set Date & Time..
Reset Totals..
Damping 10 sec
5. Use the UP/DOWN arrow keys to choose the required format: DD-MM-YY or MM-DD-YY. Press
the ENTER key.
6. Use the UP/DOWN arrow keys to select Set Date & Time . Press ENTER. A flashing cursor
appears under the first date number. Enter the date and time sequence in DD-MM-YY-HH-MM-
SS format then press the ENTER key.
7. Scroll down and select Exit then press the ENTER key to return to the MAIN menu.
NOTE: IF YOU MAKE A MISTAKE WHEN ENTERING THE DATA PRESS THE DELETE KEY TO
MOVE THE CURSOR BACK TO THE NUMBER YOU WISH TO CHANGE, THEN CONTINUE. IF
YOU ENTER AN INVALID
NUMBER AN ‘
ERR:INVALID DATE OR TIME!
’ ERROR MESSAGE IS
DISPLAYED ON THE SECOND LINE OF THE SCREEN. IF THIS OCCURS REPEAT THE SET
DATE/TIME PROCEDURE.
2.6.3 Enabling/Disabling the Backlight
The backlight can be selected to be OFF, TIMED
(illuminated until a set interval of keypad inactivity
occurs), or ON permanently. If the backlight is not
required it is recommended that you disable it to
prolong the battery discharge time.
1. From the MAIN menu, use the Up and Down scroll keys to select Setup Instrument . Press the
ENTER Key. With System selected in the Options menu, press the ENTER Key.
Alternatively, from a
Read Flow/Velocity/Energy screen, press the SYSTEM key (2). The
System Settings menu is displayed.
2. Use the UP/DOWN arrow keys to select Back-light mode . Press the ENTER key.
3. Use the UP/DOWN arrow keys to scroll through the available options: On/Timed/Off .
4. With the chosen mode selected, press the ENTER key.
5. If you select Timed , use the UP/DOWN arrow keys to select to Back-light Timeout . Press the
ENTER key.
6. Use the keypad to enter the required timeout interval (5-120s). Press the ENTER key.
7. Select Save Setup & Exit then press the ENTER key to return to the Options menu.
8. Select Exit then press the ENTER key to return to the Main menu.