Faster
Easier
Specifications
Standards
C o n n e c t o r
IEEE
Fast Ethernet 1 00Base-TX Class II Hub (Repeater), supports
two-level hub network
8
TP jacks, Port 1 with an additional
jock
for
to other hub
C a b l e
Cat. 5 UTP cable
C a b l e l e n g t h l i m i t a t i o n s
Node to Node 205M
Node
to
Hub 1OOM
Hub to Hub 5M
Data Transfer Mode
Half-duplex 1 OOMbps
S p e e d
link/Act and
fo each TP port, Power, Collision ond
for
hub
A C - D C P o w e r A d a p t e r
A C I n p u t
D C
O u t p u t :
A m b i e n t T e m p e r a t u r e
H u m i d i t y
5% to 90%
D i m e n s i o n s
x
x
E m i s s i o n
FCC Port 15 Class A and CE Mark
Faster
and
Easier Networks
The
subject to change without notice
01
dher
brands
owned by
companies
50001-300820
100
Mbps Fast Ethernet Hub
Start Guide
Before you start installing the
Fast Ehtemet Hub, verify that the package contains
the following items:
Fast Ethernet hub
n
AC-DC Power Adapter
n
This User’s Manual
Please notify your sales representative immediately if any of the aforementioned items is
missing or damaged.
Overview
The
Fast Ethernet
a standard 1
hub that meets all IEEE
Ethernet Standards. Fast Ethernet hub is a cost-effective solution for easing your network
congestion problem on existing 1
network, it offers a
migration path to
1
and multiplies the network performance up to factor of ten. This increases the
overall network transmission and improves the network cffrcicncy to accommodate
today and future high-bandwidth applications, such as multimedia, imaging and
CAD/CAM, etc.
Installation
The installation procedures arc as below:
Use CAT. 5 UTP cable,
hub to workstations.
2. Repeat the above step, as needed for each
port to be connected to a
TX device.
3.
can
to an upper level hub’s DTE port. Hubs cascading can be up to
two-level hubs.
4. Verify that the voltage of AC
is correct and
AC adapter cable’s plug into
power jack. Then, plug AC power adapter to the AC outlet.
