background image

Maximum Power Saving Mode

Using Power Management Options

93

Chapter 9 - Using Power Management Options

Your computer includes power-management options that can help the battery 
charge last longer and extend the life of the battery, LCD panel, and other 
components. Power-management options slow down or shut off system 
components when the components are not being used. 

Power management may slow down system performance. Your computer runs 
fastest with the power cord attached, and when power management is disabled.

In Windows 98 and WIndows 2000 Power management works according to the 
settings in the Power Management option on the Control Panel with the exception 
of rest mode.

If your computer shipped from the factory with Windows NT installed, 
PowerProfiler software was included to support power management. 

Maximum Power Saving 
Mode

For maximum power saving mode, the microprocessor may run at slow speed to 
conserve power. To enable this mode, set the Idle Mode field in System Setup to 
Enabled

.

Standby Mode

The Standby Timeout field in System Setup enables you to specify the time 
period that the computer can remain idle (no user input or disk activity) before the 
computer enters standby mode. You can disable this option by selecting Off, or 
you can specify a Standby Timeout delay time of 1 to 16 minutes. 

In standby mode, the system and video memory and the video controller slow 
down. The LCD backlight, hard drive, floppy drive, PC Card controller, and some 
other devices turn off to save energy. DPMS (display power-management 
signaling), a form of monitor power management, to an external monitor is 
invoked.

To resume from standby, press the Power button or touch the touchpad. Do not 
press any keys on your keyboard. Windows 98 does not have a standby mode.

N

OTE

:

In Windows 98 and WIndows 2000, the standby mode works the same as rest 
mode in system setup. Windows 98/2000 has a standby mode that operates 
separately from the standby mode in system setup.

Содержание Transport LT











































































































































































Отзывы: