Page
8
of
14
3/31/2022
Lock Identification and Set Up
In the MicroTraq app, turn ON the
scanning for locks function.
If the lock is not detected, push the P
button on the MicroIQProx lock
keypad to enable to connection.
In the app, the lock name will change
from yellow to green. Click on the green
bar.
Use the NAMES tab to set the lock name
and location.
Selecting OK when finished will send the information to the lock. The MicroTraq app will
display a confirmation message and the lock will emit an audible tone.
Manage User Access
Use the CODES tab to add or modify the keypad user code.
Selecting OK when finished will send the information to the
lock. The MicroTraq app will display a confirmation message
and the lock will emit an audible tone.
