microHAM SMORF, Руководство пользователя

Страница: 7 / 76

micro HAM © 2015 All rights reserved
Rear Panel
1.
SENSOR 1 FORWARD (FWD) or VOLTAGE (U) SAMPLE INPUT
◦
FWD/U connection port of SENSOR 1
◦
serves as INPUT 1 in 4 INPUT mode
2.
SENSOR 1 REFLECTED (REF) or CURRENT (I) SAMPLE INPUT
◦
REF/I connection port of SENSOR 1
◦
serves as INPUT 2 in 4 INPUT mode
3.
SENSOR 2 FORWARD (FWD) or VOLTAGE (U) SAMPLE INPUT
◦
FWD/U connection port of SENSOR 2
◦
serves as INPUT 3 in 4 INPUT mode
4.
SENSOR 2 REFLECTED (REF) or CURRENT (I) SAMPLE INPUT
◦
REF/I connection port of SENSOR 2
◦
serves as INPUT 4 in 4 INPUT mode
5. PTT / INHIBIT IN1
◦
configurable input coupled to SENSOR 1
6. PTT / INHIBIT OUT1
◦
configurable output coupled to SENSOR 1
7.
PTT / INHIBIT IN2
◦
configurable input coupled to SENSOR 2
8.
PTT / INHIBIT OUT2
◦
configurable output coupled to SENSOR 2
9.
TEST TONE
◦
internal tone generator output, 4 pole 3.5mm jack
10. LAN
◦
IEEE 802.3 Ethernet port
11.
AUX
◦
Accessory port
12.
iLINK
◦
first iLINK port for connection to iLINK enabled microHAM devices
13.
iLINK
◦
second iLINK port for connection to iLINK enabled microHAM devices
14.
SERIAL
◦
RS232 port for general low speed connectivity
15. DC 13.8V
◦
power input, max. 16V, center positive, shell negative
16.
POWER SWITCH
17.
GROUNDING SCREW
7