microHAM SMORF, Руководство пользователя

Страница: 55 / 76

micro HAM © 2015 All rights reserved
SENSOR 1 MENU – COPY SETTINGS
In situations where both sensors are connected to similar or same setups like SO2R, it is useful to clone
customized settings from one sensor to another in order to save a lot of duplicate adjustments. This menu allows
to copy selected sensor's data from the SENSOR 1 to the SENSOR 2.
If this menu is accessed from the root SENSOR 2 MENU, it will copy SENSOR's 2 data to SENSOR 1.
CONTROLS:
1. DATA
Sets data going to be copied.
HiPWR ALARMS – copies High Power Alarms
LoPWR ALARMS – copies Low Power Alarms
SWR ALARMS – copies SWR Alarms
PSK ALARMS – copies PSK Alarms
ARCING ALARMS – copies Arcing Alarms
ALARM SETTINGS – copies Alarm Settings
ALL ALARMS – copies all Alarms and Alarm Settings
100% LEVELS – copies 100% Power Levels Table
MISCELLANEOUS – copies Miscellaneous Settings
SENSOR CABLES – copies Sensors Cables Table
ANTENNA CABLES – copies Antenna Cables Table and Assignment
ALL SETTINGS – copies all above settings at once
2.
COPY
Select and push the EDIT button to confirm copy.
55