Microgate WITTI-TAB, Руководство пользователя

Страница: 16 / 33

Microgate Witty TAB User Manual Page 16 of 33
2 I
NTERNAL
P
ROGRAMS
The Witty·TAB display board also has a series of internal programs for various needs in athletic
performance evaluation.
The programs available at the time of printing this guide are:
# Name Description
P0 Start, Stop Basic timing with auto reset after 5 seconds
P1 Start, Lap1, Stop Basic timing with 1 intermediate time
P2 Start, Lap1, Lap2, Stop Basic timing with 2 intermediate times
P3 Speed Speed measurement based upon any length between two
photocells
P4 Lap Speed Lap speed measurement with one photocell
P5 Start, LapN, Stop Basic timing with n intermediate times and configurable
display time
P6 Continuous Timing Continuous timing, configurable "dead time"
P7 Starting System Start and Stop with reaction time at start
P8 Event Counter Counter increasing automatically with each impulse
P9 Parallel Event Counter Two counters (left and right) for two photocells
P10 Date and Time Displays date and time
P11 Time Time display
P12 ReacTime Shows reaction time from the Lynx ReacTime device
P13 Countdown Displays a countdown
P14 Lap Time Displays lap times
P15 Witty·SEM Use the Witty·Tab with the Witty·SEM system
P96 Photocell filter Configure a filter to work with certain photocells
P97 LED Segments Test Checks that the LEDs work correctly
P98 Photocell Radio Signal Test Checks the correct radio transmission functioning
P99 Parameter Configuration Configuration of the brightness, radio channel and date &
time parameters
To change program follow these steps:
•
Keep the YELLOW L
AP
-R
ESET
button pressed for at least 3 seconds.
•
The currently selected program is displayed.
•
Press the GREEN S
TART
-S
TOP
button to scroll down the above-listed programs.