Microchip Technology MPLAB ICE, Руководство пользователя

Страница: 42 / 192

MPLAB
®
ICE User’s Guide
DS51159B-page 42

2001 Microchip Technology Inc.
2.5.4 Other Tabs
No other tabs need to be edited. However, you may wish to view them to
familiarize yourself with the options available on them.
• Power tab: Displays system power information. The default is Proces-
sor Power From Emulator.
• Clock tab: Displays oscillator type and frequency information. The
default is the on-board clock with Oscillator Type as LP and Desired
Frequency as 4.0 MHz.
• Memory tab: Use this tab to set the memory configuration being used.
This tab is not available for the selected processor.
• Configuration tab: Use this tab to set up the Watchdog Timer and/or
Processor Mode, (i.e., internal and external memory). The default is
Watch Dog Timer disabled (None). Processor mode is not available for
the selected processor.
• Pins tab: Use this tab to set up pins, such as enable/disable master
clear (MCLR). This option is not available for the selected processor.
When you are through, click OK to accept the setting and close the
Development Mode dialog.
2.6 Creating a Project
The best way to develop an application using MPLAB IDE software is to
create a project. In this tutorial, you are going to create a project named
icetut16.pjt.
Before doing this however, you should create a folder
called
icetut16
in which to place the new project. Also, you should copy the
file
icetut16.asm
from the MPLAB install directory to this project directory
to keep all project files in one place.