Microchip Technology MPLAB ICE, Руководство пользователя, Страница: 130 / 192

MPLAB
®
ICE User’s Guide
DS51159B-page 130

2001 Microchip Technology Inc.
Figure 7.4: Verify MPLAB ICE – Version Information
When the dialog appears, all boxes are left unchecked by default. The Pass
and Fail counters should show the running pass and fail counts for each test.
The buttons perform the following functions:
• 2000 System – Checks all tests that pertain to an MPLAB ICE 2000
emulator system.
• Clear Tests – Unchecks all test checkboxes.
• Clear Counts – Sets all pass and fail counts to zero.
• Verify – Executes all checked tests.
• Loop Test – Performs all checked tests repeatedly until Stop Loop is
clicked.
• Help – Opens the on-line help for MPLAB ICE verify.
• Stop on first failure – If checked, testing will terminate at the first
failure.
• Close – Closes the dialog. Will not function in the middle of a test.
To run a group of verification tests, select the desired tests individually or
select all tests using 2000 System. Then, select Verify to begin running the
tests. MPLAB will display information on the progress of each test as it is
running and report any unexpected behavior as it is seen. To run all selected
tests repeatedly, select Loop Test instead of Verify.