Microchip Technology EVB-LAN9360, Руководство пользователя

Страница: 18 / 38

EVB-LAN9360
DS60001706A-page 18

2021 Microchip Technology Inc.
3.3 JUMPERS
All jumpers are located on the top side of the board, see Section 5.1 .
3.3.1 J10 – Power Management Option
If closed (1-2), this jumper connects to LAN-INH, using the LAN PHY daughter board
power management.
If closed (2-3), the board is always powered.
3.3.2 J11 – Reserved
Reserved for future use. Do not close the jumper.
3.3.3 J12 – SCL Connector
If closed (1-2), this jumper connects SCL1 to J26, pin1.
If closed (2-3), this jumper connects SCL0 to J26, pin1.
3.3.4 J13 – SDA Connector
If closed (1-2), this jumper connects SDA1 to J26, pin3.
If closed (2-3), this jumper connects SDA0 to J26, pin3.
Designator Socket Type
J10 TSW-103-23-F-S, 2.54 mm TH SQ Header, from Samtec
Suitable counter-piece: Jumper 2.54 mm
Designator Socket Type
J11 TSW-102-23-F-S, 2.54 mm TH SQ Header, from Samtec
Suitable counter-piece: Jumper 2.54 mm
Designator Socket Type
J12 TSW-103-23-F-S, 2.54 mm TH SQ Header, from Samtec
Suitable counter-piece: Jumper 2.54 mm
Designator Socket Type
J13 TSW-103-23-F-S, 2.54 mm TH SQ Header, from Samtec
Suitable counter-piece: Jumper 2.54 mm