DS20006685A-page 20
2022 Microchip Technology Inc. and its subsidiaries
EV20F92A SERIAL MEMORY SPI
EVALUATION KIT
USER’S GUIDE
Chapter 3. Graphical User Interface (GUI)
3.1
INTRODUCTION
The Serial Memory SPI Evaluation Kit includes a Graphical User Interface (GUI) which
is used as an interface between the user’s PC and the evaluation kit hardware. The GUI
allows the user to easily interact with the SPI Serial EEPROM using built-in read and
write features. The GUI also highlights the value-added features of the installed
supported device. In the subsequent sections, the GUI features and functions are
explained in detail to help the user to interact with the installed SPI Serial EEPROM.
The GUI detects the USB Base Board firmware version and determines whether it is
compatible with that GUI version. If the GUI determines the USB Base Board firmware
is incompatible, the GUI will try to update the firmware using a sequence of on-screen
steps. Alternatively, this process can be done manually by the user if he or she
chooses. Refer to the
Chapter 4. “USB Base Board Firmware Update”
for details on
the firmware update process. If the GUI version is earlier than the USB Base Board,
download the latest version of the GUI (refer to
Section 2.2 “Installing the Graphical
for additional information).
FIGURE 3-1:
GRAPHICAL USER INTERFACE