Microchip Technology dsPICDEM MCLV-2, Руководство пользователя

Страница: 25 / 44

Hardware Overview

2012 Microchip Technology Inc. DS52080A-page 25
TABLE 2-6: JUMPER DESCRIPTIONS
No. Designator Position Description
1 JP1 1-2 Connects current sense phase 1 to MONITOR_1
3-4 Connects voltage sense phase 1 to MONITOR_1
5-6 Connects Hall sensor interface HA to MONITOR_1
2 JP2 1-2 Connects current sense phase 2 to MONITOR_2
3-4 Connects voltage sense phase 2 to MONITOR_2
5-6 Connects Hall sensor interface HB to MONITOR_2
3 JP3 1-2 Connects current sense DC Bus to MONITOR_3
3-4 Connects voltage sense phase 3 to MONITOR_3
5-6 Connects Hall sensor interface HC to MONITOR_3
4 JP4 1-2 Connects USB receive line to Rx
3-4 Connects LIN receive line to Rx
5-6 Connects CAN receive line to Rx
7-8 Connects UART receive line to Rx
5 JP5 1-2 Connects USB transmit line to Tx
3-4 Connects LIN transmit line to Tx
5-6 Connects CAN transmit line to Tx
7-8 Connects UART transmit line to Tx
TABLE 2-7: ADDITIONAL JUMPERS
Designator Functions
J3 Bypass 15V regulator connector for gate driver IC
J5 LIN master select
J6 Connects BP1-BP2/J2 to motor connector block J7
JP11 CAN end enable