Figure 2-1. ATECC608A Trust Connected to a CryptoAuth Trust Platform Development Board
Attention:
The angled notch on the ATECC608A Trust Development Board must be aligned with
the angled line on the silk screen near the mikroBUS connector.
3.
Select the device that you want to connect to the host via the DIP switches shown on the ATECC608A Trust
Development Board. Switch 3 is on and all others are off. This selects an ATECC608A-TFLXTLS device.
4.
Connect a USB cable between the CryptoAuth Trust Platform on the host system where the software is
developed.
5.
Invoke the software tools for the given application or the use case that is being developed.
2.2
Xplained Pro Connections
Some Microchip development boards support only the Xplained Pro extension headers. Through use of an adapter
board, the ATECC608A Trust Development Board can still be used.
shows the full assembly of the
ATECC608A Trust Development Board
and an
Development
Board.
DT100104
Connecting the Board
©
2019 Microchip Technology Inc.
User Guide
DS50002922A-page 7
