MicroBT WhatsMiner M20S, Руководство по эксплуатации

Страница: 12 / 32

12 / 32
3.2.Miner Network Environment
The miner defaults to DHCP to obtain dynamic ip. Therefore, the mine network
must be configured with a DHCP server, or the router can enable dhcp to dynamically
allocate the IP address service. The running time of the miner, the correctness of the
calculation statistics, etc. depend on the network NTP time. The mining machine itself is
configured with multiple NTP server addresses of the public network by default. In order to
speed up the acquisition of network time and improve the time precision, it is
recommended to mine the network. Configure a local NTP server.
4.Miner Connection and Pre-Power Check
（
1
）
Before the wiring and power-on of the machine, according to the warning signs
on the side of the machine, shake the machine to check whether there is a radiator or
other components falling off, to ensure that there is no radiator or other period to fall
off before wiring and power-on.
（
2
）
The machine is connected to the power wiring, and the network port is connected
to the switch. Check that the power control wiring, fan control wiring, adapter board
control wiring, and fan control wiring are not loose, and the copper line is connected
correctly before powering on the machine.
Notes
：
（
1
）
When the power copper busbar is connected to the hash board, the positive and
negative poles of the copper busbar are not connected incorrectly, and the screw