•
Technical Support
26
Specifications
DVD Recorder Drive:
DVD-+R/RW/DL CD-R/RW Recorder
Power Supply:
Auto Detect AC Power: 90VAC – 240VAC, 47Hz – 63Hz
Weight:
MX-1: 58 lbs; MX-2: 63 lbs.
Connectivity:
USB 2.0 required
Warranty:
One Year Limited Warranty
Media Types:
Printable-surface 120mm CD-R/RW or DVD+-R/RW/DL
Printer:
Print Technology:
HP Inkjet
Print Quality, Black: 600 x 600 dpi
Print Quality, Color: up to 4800 x 1200 optimized dpi
Print Speed:
Depends upon percentage of coverage and print mode selected
•
Approx. 45 seconds for 100% full-color coverage, Photo Normal Mode
•
Approx. 20 seconds for 100% full-color coverage, Text & Graphics Best Mode
•
Approx. 12 seconds for 20% coverage Text & Graphics Normal Mode
•
Approx. 6 seconds for 100% full coverage Draft Normal Mode
Maximum Print Width:
4.72” (120mm)
Ink Cartridges:
Microboards PFP-HC-CYAN, PFP-HC-MAGENTA, PFP-HC-YELLOW, and
PFP-HC-BLACK
Label Editing Software:
SureThing™ First Edition Software for Windows included
Technical Support
For technical questions or support issues, contact Microboards Technology technical support:
United States
PH: 952-556-1639
FAX: 952-556-1628
www.microboards.com
Europe
PH: +44 (0) 845 230 7800
www.microboards.co.uk
Japan
PH: 03-3561-2266
www.microboards.co.jp
Please have the Model and Serial Number of your PF-3 Print Factory available when contacting
Technical Support.
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s authority to
operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and antenna
•
Connect the equipment into an outlet on a circuit different than that to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European standards: EN 55022,
EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive 93/68/EEC.
Содержание MX SERIES
Страница 2: ...Introduction 2...
Страница 4: ...Introduction 4...
