4
This is a mini vertical milling machine having multiple functions of either face milling or drilling. Many sizes and kinds of
cutters are available. Be sure to purchase the correct cutter for the intended job.
1.1 Machine Specifications
Max. table travel
Max. cross slide
Max. spindle travel
Headstock tip angle
Max. power
Spindle speed
Taper of hole in spindle
Drilling capacity
End milling capacity
Face milling capacity
Machine weight
Shipping dimension
8.5”
4”
7”
– 45˚ to +45˚
500 watts
0 –2500 rpm
R8
1/2”
1/2”
1”
GW: 58kg NW: 50 Kg (110 lbs.)
560mm x 500mm x 740mm (L x W x H)
a) Purpose of this machine:
This machine is designed for drilling, deep milling and face milling of small work pieces up to 300mm x 200mm
x 200mm (about 12” x 11” x 11”).
b) Before operating this machine:
- Read these instructions completely.
- Obtain some professional training on drilling and milling work.
- Familiarize yourself with the design limits of this machine.
- Take every safety precaution possible
c) Some important safety information:
- The noise level during operation is 70 to 75dB(A).
- The temperature range suitable for the operation & storage of this machine is -20 to +40 degrees C.
d) Special Warnings for this machine:
- If a power outage causes an interruption in machine operation, be sure to avoid accidental
start-up by closing the emergency button and rotating RPM dial to OFF until line power is restored.
- Always wear approved eye protection during operation.
e) Correct handling of this machine:
- The net weight of this machine is about 110 pounds (50 Kg). This machine would best be handled
with the help of an appropriate lifting device.
- If the operator has to handle this machine without a lifting tool, be sure you can lift this
weight comfortably without personal injury.
SOME SAFETY FEATURES OF THIS MACHINE
CHAPTER 1 • SPECIFICATIONS