Page 6
scanCONTROL 3010 / 3012
6.
Transmitting Measurement Results
scanCONTROL 30xx offers the following options for transmitting measurement results:
- Ethernet interface
Modbus TCP protocol
UDP protocol
Analog output of measurement values (via optional
2D/3D Output Unit)
Digital output of switching signals (via optional 2D/3D Output Unit)
Fieldbus connection PROFINET, EtherNet/IP, EtherCAT (via optional 2D/3D Gate-
way)
- RS422 interface
Modbus RTU protocol
Measurement value transmission in ASCII format
7.
System Requirements
scanCONTROL Configuration Tools
The following minimum system requirements are necessary:
- Windows 7, Windows 8 or 8.1, Windows 10 (each 32 bit and 64 bit)
- 1-GHz or faster (32 bit and 64 bit) processor / 1 GB RAM (recommended 4 - 8 GB)
- Screen resolution: 1024 x 768 (recommended 1920 x 1080)
scanCONTROL 3D-View
The following minimum system requirements are necessary:
- Windows 8 or 8.1, Windows 10 (each 64 bit)
- 1-GHz or faster (64 bit) processor
- 1 GB RAM (recommended 16 GB)
- Screen resolution: 1024 x 768 (recommended 1920 x 1080)
- Graphics card / GPU with OpenGL 3.1 or higher