manualshive.com logo in svg

MICRO-EPSILON scanCONTROL 25 100 Series, Руководство по эксплуатации, Страница: 12 / 60

Поделиться
Скачать
MICRO-EPSILON scanCONTROL 25 100 Series Скачать руководство пользователя страница 12

Page 12

Functional Principle, Technical Data

scanCONTROL 25xx

3. 

Functional Principle, Technical Data

3.1 

Short Description

3.1.1 

Measuring Principle 

The scanCONTROL 25xx sensor operates accord-

ing to the principle of optical triangulation (light 

intersection method):

 - A laser line is projected onto the target surface 

via a linear optical system.

 - The diffusely reflected light from the laser line 

is replicated on a sensor array by a high quality 

optical system and evaluated in two dimensions.

The laser line triangulation corresponds in principle 

to the triangulation of a laser point. In addition, 

during the measurement a row of lines are simulta-

neously illuminated by the laser line. Apart from the 

distance information (Z-axis), the exact position of 

each point on the laser line (X-axis) is also acquired 

and output by the system.

Measuring 
range X-axis 
(profile width)

Measuring 
range Z-axis 
(profile height)

3.1.2 

System Setup

The scanCONTROL 25xx sensor is a compact sensor with an integrated controller. All necessary integral 

parts are combined in one housing.

Содержание scanCONTROL 25 100 Series





























































Отзывы:

Нет отзывов