Page 6
Safety
RS232 Ethernet Converter
1.3
Notes on CE Identification
The following applies to the RS232 Ethernet converter: EMC regulation 2004/108/EC
Products which carry the CE mark satisfy the requirements of the EMC regulation 2004/108/EC ‘Electromag-
netic Compatibility’ and the European standards (EN) listed therein. The EC declaration of conformity is kept
available according to EC regulation, article 10 by the authorities responsible at
MICRO-EPSILON Eltrotec GmbH
Manfred-Wörner-Straße 101
73037 Göppingen / Germany
The RS232 Ethernet converter is designed for use in industrial and residential areas and satisfies the require-
ments of the standard
-
EN 60947-5-2: 2007
The RS232 converter satisfies the requirements if they comply with the regulations described in the instruc-
tion manual for installation and operation.
1.4
Proper Use
The RS232 Ethernet converter allows sensors with serial interface to connect to a local network via Ethernet
bus.
-
The system may only be operated within the limits specified in the technical data
.
- Use the system in such a way that in case of malfunctions or failure personnel or machinery are not endan-
gered.
- Take additional precautions for safety and damage prevention for safety-related applications.
