Page 25
Initial Operation
IMS5x00
Measurement Configuration
Common measurement configurations (presets) for
various target surfaces are stored on the controller. This
allows you to quickly start with your individual measure-
ment task. In a preset the basic features like peak or ma-
terial selection and calculation functions are already set.
The signal quality is set to
Balanced
at the factory.
Go to the
Home
>
Measurement configuration
menu and start the
Measurement configura-
tion
.
Select a configuration.
Then, you can apply your own settings (setups). When
saving a modified preset, the web interface displays a
dialog for entering a setup name. This prevents presets
from being overwritten by accident.
Data output only starts when the associated interface is
activated.
