MICRO-EPSILON confocal DT2471 Скачать руководство пользователя страница 8

Страница: 8 / 166

Page 8

Safety

confocalDT 24x1

1.3

Notes on CE Marking

The following apply to the confocalDT 2451/2461/2471 measuring system:

EU directive 2014/30/EU

EU directive 2011/65/EU, “RoHS” category 9

Products which carry the CE mark satisfy the requirements of the EU directives cited and

the European harmonized standards (EN) listed therein. The EU Declaration of Confor-

mity is available to the responsible authorities according to EU Directive, article 10, at:

MICRO-EPSILON MESSTECHNIK

GmbH & Co. KG

Königbacher Straße 15

94496 Ortenburg / Germany

The measuring system is designed for use in industrial environments and meets the

requirements.

1.4

Intended Use

The confocalDT 2451/2461/2471 is designed for use in industrial and laboratory ap-

plications. It is used for

measuring displacement, distance, profile, thickness and surface inspection

in-process quality control and dimensional testing

The system must only be operated within the limits specified in the technical data, see

Chap.

2.6

The system must be used in such a way that no persons are endangered or machines

and other material goods are damaged in the event of malfunction or total failure of

the controller.

Take additional precautions for safety and damage prevention in case of safety-related

applications.

1.5

Proper Environment

Protection class sensor: IP 40 ... IP 65, see Chap.

2.6

Protection class controller: IP 40

Protection class external light source: IP 40

Optical inputs are excluded from protection class. Contamination leads to impairment or

failure of the function.

Operating temperature

Sensor: 5 to +70 °C (+41 to +158 °F)

Controller: 5 to +50 °C (+41 to +122 °F)

External light source: 5 to +40 °C (+41 to +104 °F)

Storage temperature: -20 to +70 °C (-4 to +158 °F)

Humidity: 5 - 95 % (non-condensing)

Ambient pressure: atmospheric pressure

EMC: According to EN 61000-6-3 / EN 61326-1 (Class B) and EN 61 000-6-2 /

EN 61326-1

CAUTION

Содержание confocal DT2471







































































































































































Результаты поиска

Содержание confocal DT2471

Отзывы:

Похожие инструкции для confocal DT2471

Бренды по названию

Популярные бренды

MICRO-EPSILON confocal DT2471, Руководство по эксплуатации

Результаты поиска

Содержание confocal DT2471

Отзывы:

Похожие инструкции для confocal DT2471

Бренды по названию

Популярные бренды