MICRO-EPSILON colorCONTROL MFA-5, Инструкция по эксплуатации

Страница: 16 / 80

Page 16
Installation
colorCONTROL MFA-5
4.2.5 Shortening the Optical Fiber
The optical fibers of the colorCONTROL MFA-5 are shipped with a length of approximately 600 mm as stan-
dard.
Shorten the optical fiber to the optimum length.
> This prevents damage to the optical fiber.
i
Ensure during the cutting that the optical fiber is at 90° to the knife, otherwise light loss must be expect -
ed.
We recommend only using each cutter hole once to guarantee a clean cut of the optical fiber.
Fig. 8 Cutting tool for optical fiber
4.3 Pin Assignment
USB connection
RS232 connection
PWR = Power
Fig. 9 colorCONTROL MFA-5 pin assignment
NOTICE