Page 58
Operation
capaNCDT 6100
Synchronization in Multichannel Systems
5.5
Several measuring systems in the capaNCDT 6100 series can be operated simultaneously as multichannel
systems.
Synchronization of the measuring systems avoids interference between the sensors:
Plug SC30 synchronization cable (accessory) in the SYN OUT (synchronization output) socket in cont-
roller 1.
Plug the other end on the cable into the SYN IN (synchronization input) in controller 2.
The oscillator of controller 2 switches automatically to synchronization mode, i.e. it acts as slave to the
-
master oscillator in controller 1.
The influence of unsufficient grounded targets will be excepted.
-
Synchronise several measuring systems with SC30 cable if necessary.
Controller 1
Controller 2
Controller 3
SYN
OUT
SYN
IN
SC30
SC30
SYN
IN
SYN
OUT
Synchronization in multichannel systems
Fig. 9
i
Automatic synchronization, each controller can work as master.
Bending radius SC30:
30 mm (one time)
-
60 mm (alternating)
-
Содержание capaNCDT 6100
Страница 32: ......
Страница 34: ...capaNCDT 6100 6 Maintenance 59 7 Warranty 60 8 Decommissioning Disposal 60 9 Appendix 61...
