Page 35
Safety
English
capaNCDT 6100
Safety
1.
The handling of the sensor assumes knowledge of the instruction manual.
Symbols Used
1.1
The following symbols are used in this instruction manual:
Indicates a hazardous situation which, if not avoided, may result in minor or moderate
injury.
Indicates a situation which, if not avoided, may lead to property damage.
Indicates a user action.
i
Indicates a user tip.
Warnings
1.2
Disconnect the power supply before touching the sensor surface.
Static discharge
>
Danger of injury
>
Connect the power supply and the display/output device in accordance with the safety regulations for electri-
cal equipment.
Danger of injury
>
Damage to or destruction of the sensor and/or controller
>
Avoid banging and knocking the sensor and controller
Damage to or destruction of the sensor and/or controller
>
The power supply may not exceed the specified limits.
Damage to or destruction of the sensor and/or controller
>
Protect the sensor cable against damage
Destruction of the sensor
>
F
> ailure of the measuring device
Содержание capaNCDT 6100
Страница 32: ......
Страница 34: ...capaNCDT 6100 6 Maintenance 59 7 Warranty 60 8 Decommissioning Disposal 60 9 Appendix 61...
