MICRO-EPSILON C-Box/2A, Руководство по эксплуатации

Страница: 74 / 96

Page 74
Appendix | ASCII Communication with Sensor
C-Box/2A
A 2.3.6 Data Output
A 2.3.6.1 Selection Digital Output
OUTPUT NONE|ETHERNET|HTTP|USB
Activates data output at the desired interface.
- NONE: No measured value output
- ETHERNET: Output of measured values via Ethernet
- HTTP: Output of measured values over the web page of the C-Box/2A
- USB: Output of measured values via USB
Default = HTTP
A 2.3.6.2 Output Data Rate
OUTREDUCE <Output reduction> ([ANALOG] [USB] [ETHERNET])|NONE
Reduces the measured value output for all available interfaces.
- 1: Output of every measured value
- 2 ... 1000: Output of each n-th measured value
Default = 1 NONE
A 2.3.6.3 Scale Output Values
OUTSCALE_RS422_USB STANDARD|(TWOPOINT <Minimum measured value> <Maximum mea-
sured value>)
Sets the scaling of the C-BOXVALUE via USB.
The default scaling is for distance/level 0 to MR (Sensor 1) and for thickness measurement 0 to MR (Sensor1)
+ MR (Sensor2) (MR=Measuring range).
The minimum and maximum measured value must be indicated in millimeters. The available output range
of the USB output is then spread between the minimum and maximum measured value. The minimum and
maximum measured value must lie between -1024.0 and 1024.0 mm with 4 decimal places. The maximum
value must be larger than the minimum value.
Default = STANDARD 0.0 50.0