manualshive.com logo in svg

MICRO-EPSILON C-Box/2A, Руководство по эксплуатации

Поделиться
Скачать
MICRO-EPSILON C-Box/2A Скачать руководство пользователя страница 17

Page 17

Operation

C-Box/2A

5. 

Operation

5.1 

Getting Ready for Operation

The C-Box/2A must be installed in accordance with the installation instructions

, see 4, 

and connected to an 

automation unit, e.g. PLC, and the power supply in compliance with the connection instructions.
After switching on the operating voltage, the C-Box/2A performs an initialization sequence and goes into the 
measurement operating mode afterwards. 
The laser operation on optical sensors is only indicated at the sensor by an LED. If no measured values are 
transmitted, check whether the sensors are switched on and whether a target is in the measuring range of the 
sensor.

5.2 

Installation of USB Driver

You will find the driver C-Box/2A WinUSB under:

www.micro-epsilon.de/link/software/medaqlib

  Connect C-Box/2A to the usb port of your computer.
  Connect C-Box/2A to power supply.
  Open Windows system control.
  Go to device manager.

You will see a device with a question mark (unknown device).

  Right mouse click on it.

A menu opens.

 Select 

Properties

.

 Select 

Drivers

.

 Select 

Update driver

.

  Browse to the directory with the downloaded Win usb drivers.
  Click on 

ok

.

  Wait until installation will finish.

Содержание C-Box/2A

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды