Micro Autonomations Fan Controller v3 Скачать руководство пользователя страница 19

 

Micro Autonomations LLC – Fan Controller v3 

19 

Document Rev 1.0 

Warranty 

Micro Autonomations LLC warrants this product to be free from defects in material and workmanship 
for a period of twelve (12) months from the date of sale of the original purchaser. Micro Autonomations 
LLC will repair this product free of charge if, in the judgment of Micro Autonomations LLC it has been 
proven defective within the warranty period. The product should be returned, at the customer expense, 
to the location of original purchase. This warranty does not cover any expenses incurred in the removal 
and/or reinstallation of the product.  Micro Autonomations LLC is limited in liability to the original sale 
price of the product. 
 
This warranty does not apply to any product damaged by improper installation, misuse, abuse, improper 
line voltage, fire, flood, lightning, or other acts of God, or a product altered or repaired by anyone other 
than Micro Autonomations LLC. This warranty is in lieu of other warranties, expressed or implied, 
including any implied warranty of merchantability. No person is authorized to assume for Micro 
Autonomations LLC any other liability concerning the sale of this product. 

Содержание Fan Controller v3




















Отзывы: