Micom P721, Техническое руководство

Страница: 53 / 334

User Guide P72x/EN FT/C21
MiCOM P721/P723 Page 13/38
2. MENUS
The menu of MiCOM P721 and P723 relays is divided into main menus and submenus. The
available content depends on the model of the relay.
2.1 Default display
By default, the LCD displays the current value measured (selected phase or earth). As soon
as an alarm is detected by the relay, that information is considered as more important and
the alarm message is then displayed instead of the default value.
2.2 Menu contents description
The menu of MiCOM P72x relays is divided into eight main sections. To access these menus
from the default display press
. To return to the default display from these menus or sub-
menus press .
DEFAULT
DISPLAY
OP PARAMETERS
CONFIGURATION
MEASUREMENTS
COMMUNICATION
PROTECTION G1
PROTECTION G2
AUTOMAT. CTRL
RECORDS
FIGURE 2: ORGANIZATION OF MiCOM P72X MAIN MENU
NOTE: The content of the menu is presented in the document P72x/EN HI.
This table helps the user to navigate through the different menus and
submenus.
For MiCOM P72x range, while navigating between submenu points,
the user can press the key
to go back to the corresponding head
menu.
Using MiCOM S1 Studio, the menu is displayed with a tree structure. A click on the “+” sign
(or a double click on the menu title) opens the corresponding submenu.
The second column displays the corresponding value for each parameter.