manualshive.com logo in svg

Micom P631, Техническое руководство

Поделиться
Скачать
Micom P631 Скачать руководство пользователя страница 525

9.2

IED Details

The category “IED Details” contains several settings that characterize the device
as well as the SCL file, which identifies the IEC 61850 configuration.

 

Parameter

Default Value

   

SCL Details

SCL File ID

PX 631

 

 

 

Identification of the .MCL configuration file. If required, this preset value may be
modified by, for example, entering a bay name.

 

SCL File Version

240

 

 

 

Specific value to identify the IEC 61850 data model and configuration.
If required, this preset value may be modified by, for example, identifying the
revision states during engineering.

 

 

 

Parameter

Default Value

Address

 

IED Details

Name

TEMPLATE

104 057

 

 

Explicitly assigned device name for the function in the system (IED); is part of
the Logical Device Name.
Important note: According to the IEC standard the name must consist of only
letters (A..Z, a..z), digits (0..9) and underscore characters (_), and the name
must start with a letter. Note that a non-standard name causes problems with
the IEC 61850 communication.

 

 

 

Parameter

   

Template Details

ICD Template

 

 

SCL Schema Version

 

 

Description

 

 

Type

 

 

Configuration Revision

 

 

Supported Models

 

 

 

The values listed in the column “Template Details” only provide information.
They are preset and cannot be modified.

 

 

9 IEC 61850 Settings via IED Configurator

P631

P631/EN M/R-11-C // P631-310-650

9-3

Содержание P631































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды