MICHIGAN Ravenger 1950 Скачать руководство пользователя

Страница: 8 / 28

Ravenger 1950 Wood Chipper and Shredder

E&OE

14. Insert a towing arm locking pin (

) through the frame and handle and secure the pin using an R-clip

(

). A locking pin and clip is also supplied for securing the other end of the towing arm.

Check Cutting Blades

The cutting system features a fixed blade that is attached to the machine and a spinning rotor that has

2 blades. For safe and correct operation, the clearance between the fixed blade and rotor blades must

be correct and all blade fasteners are tight. Before using the machine:

•

Check that the cutting blade clearance is between 0.5 and 1.5mm.

•

Check that the cutting blade fasteners are secure.

After the first hour of use, re-check the blades.

4-Stroke Engine Oil

The product is NOT supplied with engine oil, although traces of oil from the

manufacturing process may be present. It is essential to add adequate engine oil of the

correct type to the engine before use – see

Checking and Changing Engine Oil

Failure to add engine

oil will void the product warranty

Four-stroke engines require engine oil in the crankcase for lubrication of internal components. Severe

or irreparable damage may occur if the engine is allowed to run without engine oil. The engine oil level

requires regular maintenance. Check the engine oil level and ensure that the oil level is at or just under

the maximum level indicator.

Always check the engine oil level before starting the engine. See

Checking and Changing Engine Oil

Air Filter

The air filter is used to prevent dirt and other particles from possibly entering the engine and causing

internal damage to it. The air filter requires regular maintenance.

Always check the air filter before starting the engine. See

Checking, Cleaning and Replacing the Air

Filter

Fuel

Petrol/fuel/gasoline is extremely flammable – keep clear of naked flames or other

ignition sources. • The engine must be cool before refuelling.

Adequately fill the fuel tank with the correct fuel type.

•

For 4-stroke engines, use non-ethanol unleaded petrol (higher RON values will provide best engine

performance). Do not use old or contaminated fuel.

To fill or top up fuel:

1. Place the machine in an upright position on a flat and level surface.

2. Clean the machine around the fuel filler so that no dirt or other material enters the engine when the

cap is removed.

3. Remove (rotate left) the fuel filler cap.

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Содержание Ravenger 1950





























Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды

MICHIGAN Ravenger 1950, Руководство пользователя

Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды