MICHIGAN Ravenger 1950 Скачать руководство пользователя

Страница: 24 / 28

Ravenger 1950 Wood Chipper and Shredder

E&OE

Troubleshooting

Running petrol engines in confined areas

CAN KILL IN MINUTES

. Engine

exhaust fumes contain carbon-monoxide – a deadly gas that you cannot smell or

see. NEVER run a petrol engine in confined areas EVEN IF windows and doors

are open. ONLY run petrol engines OUTDOORS and away from doors, windows and vents. •

Petrol/fuel/gasoline is extremely flammable – keep clear of naked flames or other ignition sources. The

product is NOT supplied with engine oil, although traces of oil from the manufacturing process may be

present. It is essential to add adequate engine oil of the correct type to the engine before use – see

Checking and Changing Engine Oil

Failure to add engine oil will void the product warranty

. • Do

not have the engine running during inspection and maintenance unless specifically required. • The

engine should be cool enough to touch before performing maintenance activities. • Some maintenance

activities described may be beyond the scope of some users. For procedures that you are not

comfortable with or have the tools or experience for, have the unit serviced by a service centre or

qualified technician.

The following information may assist in identifying a problem and rectifying it.

Note

: Some procedures listed here may need to be performed by a service centre or qualified

technician. • If problems persist after following all suggested actions, contact a service centre or

qualified technician.

Difficulty starting the engine.

Possible Fault

Action

Lack of fuel

Check that there is fuel in the tank and the fuel system is primed. • To further check if fuel is

reaching the carburettor, remove the carburettor drain plug and check if fuel drains.

Engine “OFF”

Ensure engine ON/OFF switch is in the “ON” position (if applicable). • Ensure that the

emergency engine stop button is not engaged (that is, reset the switch).

Not enough or too much engine oil

Check oil level and ensure that the level is at or just below the recommended maximum

level.

lades jammed

Remove jammed material from the machine.

Carbon build-up on spark plug

Remove the spark plug and clean any carbon from the electrodes before re-installing it.

Spark plug faulty

Remove the spark plug, then reconnect the plug lead to it. Place the engine ON/OFF switch

in “ON” position. Touch the spark plug electrode to a part of the engine crankcase, away

from the spark plug hole, and attempt to start the engine – a spark should be visible across

the electrodes as the engine is rotated. If no spark is visible, replace the spark plug.

Engine “flooded” with fuel

Place the choke in “HOT” or “RUN” position. Leave the ON/OFF switch in the “OFF” position.

Pull the starter cord several times to assist clearing excess fuel from engine before

attempting to start engine.

Engine starts but does not idle.

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Содержание Ravenger 1950





























Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды

MICHIGAN Ravenger 1950, Руководство пользователя

Результаты поиска

Содержание Ravenger 1950

Отзывы:

Похожие инструкции для Ravenger 1950

Бренды по названию

Популярные бренды