background image

26

Limited Warranty

MPT

 guarantees to the original 

purchaser this tool to be free 
of defects in material and 
workmanship for a period 
of one hundred eighty (180) 
days after shipment. This 
guarantee is limited to the 
repair or replacement of any 
part(s), upon our examination, 
which prove to have been 
defective. This guarantee does 
not cover damage caused by 
normal wear or misuse due to 
lack of lubrication, excessive 
air pressure, water or other 
contaminants from the air line, 
cosmetic damage or damage 
due to negligence, misuse, 
abuse, failure to follow operating 
instructions or accidental spills, 
damage due to environmental 
causes such as floods, airborne 
fallout, chemicals, salt, hail, 
windstorms, or lightning, 

damage due to accidents, fire, 
theft, or vandalism, damage 
due to improper connection 
or modification of equipment, 
product(s) which have been 
opened or tampered with for 
any reason or which have been 
damaged due to alteration, 
or repair by other than an 
authorized 

MPT

 service center.

Except as expressly set forth in 
this warranty, 

MPT

 makes no 

other warranties, expressed or 
implied, including any implied 
warranties of merchantability and 
fitness for a particular purpose. 

MPT

 expressly disclaims all 

warranties not stated in this 
limited warranty. Any implied 
warranties that may be imposed 
by law are limited to the terms of 
this expressed limited warranty. 

For Your Records:

Dealer Contact Name  _______________________________________

Dealer Contact Phone  ______________________________________

Date of Purchase  ___________________________________________

Serial Number  _____________________________________________

Содержание 750SS Series





























Отзывы: