Condumax II Transportable
Sampling System User’s Manual
Michell Instruments
3
INTRODUCTION
The gas handling components are as follows:
Coalescing Filter (
F1
)
Provides protection of the moisture sensor within the
Condumax II instrument.
Pressure Gauge (
PG1
)
Provides indication of sample gas inlet pressure.
Pressure Regulator (
PR1
)
Allows the user to manually set the sample gas analysis
pressure for hydrocarbon dew-point measurement.
Non-return valve (
NRV1
)
Provides system protection from back pressure of vent
gas when sample gas is not flowing.
Metering Valve (
MV1
)
Allows the user to manually set the sample gas flow rate
across the dew-point sensors.
Flowmeter (
FM1
)
Provides indication of the sample gas flow rate across
the dew-point sensors.
Needle Valve (
NV1
)
Allows the user to manually control the bypass flow rate
across the coalescing filter.
Sample inlet
Sample outlet
FM1
MV1
NRV1
Filter Bypass/
Drain outlet
PR1
PG1
F1
NV1
AC Power
gland entry
PR1 Adjustment -
Remove cap. Adjust with 4mm
hex key.
Figure 2
Components
There is an option to add an ‘OUTPUTS’ junction box within the enclosure, allowing the
signals from the Condumax to be used externally
Содержание Condumax II
Страница 28: ...http www michell com ...
