MHS Boilers XenoROL XR40, Инструкция по установке, эксплуатации и обслуживанию, Страница: 14 / 84

XenoROL®
14
TYPICAL XenoROL LOOSE PARTS
Part Number Item Use Illustration
41700910
Line-shaft Guard End Cover
with Set Collar Kit COVER
with Set Collar, Kit
Cover End of Lineshaft at
Termination of Conveyor
See WARNING Page 13
90140001 Safety Caps Cover End of Line-shaft Keyway See WARNING Page 20
90314510 Line-shaft Guard, 10’ straight Guard Line-shaft See Page 33
41701000 Attaching Bracket Fasten Line-shaft Guard See Page 33
95200001 Spring Clip Nut 1/4 - 20 Fasten Line-shaft Guard See Page 33
95000021
Hex Head Flange Bolt 1/4-
20x3/4
Fasten Line-shaft Guard See Page 33
95300036 Rubber Washer Isolate Guard See Page 33
90480028 U-joint Cover Guard Horizontal to Incline, Straight Beds
90140025 Coupler Chain Line-shaft Coupling Bed to Bed See Page 20
Varies by Size Floor Support Support Conveyor Frames See Page 14
80400002 KBA Knee Brace Brace Frame to Support Leg See Page 15
80400003 KBB Knee Brace Brace Frame to Support Leg See Page 15
80400004 KBC Knee Brace Brace Frame to Support Leg See Page 15
80700001 Guard Rail Arm Support Adjustable Channel G.R. See Page 34
80700006 Guard Rail Upper Bracket
Fasten Adjustable Channel G.R. to
Arm
See Page 34
80700007 Guard Rail Lower Bracket Fasten Arm to Frame See Page 34
80700011 Guard Rail Splice Angle Support Rail to Rail Joint See Page 34
95000027 1/4-20 Bolt x 2" Hex Head Upper Bracket to Channel G.R. See Page 34
95000075 3/8-16 x 1" Hex Head Bolt
Lower Bracket to Frame and
Brackets to Arm
See Page 34
95000020 1/4-20 x 3/4" Hex Head Bolt Splice Angle to Channel Guard See Page 34
95200050 1/4-20 Nuts Adjustable Channel G.R. See Page 34
80700112 Spacer Channel Ceiling Hanger See Page 16
80700013 V-Bracket Ceiling Hanger See Page 16
Varies by Length Cross Pipe Ceiling Hanger See Page 16
80701011 Standhead Connector Bed Joints See Page 15
40700051 Butt Bolt Connectors Bed Joints See Page 15
Special Connector Devices Per Application
Electrical Components Per Application
Special Device Parts Per Application
95000072 3/8-16 x 3/4 Hex HD Bolts Butt Bolts, Braces, Supports
95000074 3/8-16 x 3/4 Truss HD Bolts Angle Guard Rail
95200061 3/8-16 Nuts Angle Guard Rail
90530009 O-ring Drive Belts
Rollers on discharge end of beds
24" wide or more
90530005 O-ring Slave Belts Roller to roller belts at bed joints
80701002 2" Angle Guard Rail Straight conveyor
Varies by width Inside & Outside Angle G.R. Curves
Varies by width
Rollers for beds 24" wide or
more* Carrying rollers mountedholes in
hex frame holes
* Rollers for 30" wide conveyor and wider are shipped as loose parts.
Components for pneumatic options, including solenoid valves, for pneumatic options, fittings, air lines and mounting brackets are shipped as
loose parts.
90480006rev092010