Operating instructions iQ-Oval CDS V1-4.docx
page 19 of 66
7.
Design and Operation
This section describes design and operation and indicates the individual assemblies.
7.1.
General Process Description
The operator applies a substrate (usually a T-shirt) to the pallets at the locating
surface. The substrate will be fixed in position by means of the spray adhesive applied
to the pallets beforehand. Subsequently, the machine moves the substrate to the first
print station, where the substrate is printed by means of screen printing or treated
with optional accessories. Subsequently, the substrate moves to the second station,
where it is treated again, before the process continues with all other stations. Finally,
the substrate arrives at the unloading point, where an operator takes it from the
machine for further processing.
7.2.
Overview Machine Parts
Pallets
Print stations
Control panel
Tables
Base frame
