Operating instructions iQ-Oval CDS V1-4.docx
page 11 of 66
1.8.
Safety Signs on the Machine
The following safety signs are attached to the corresponding points of the machine:
Danger
Description
Location
Warning against squashing of
parts of the body, in particular
arms or hands.
At squeegee carriages.
Warning of dangerous voltage. At current-carrying parts of the
machine with 230/400VAC.
The adhesive labels must be replaced if illegible (due to dirt or damage).
1.9.
Other Valid Rules and Regulations:
The customer must comply with all regulations applicable in the country where the
machine is located.
2.
Intended usage of the machine
The machine is intended for the printing of substrates (usually textiles such as T-
shirts, but also paper or similar materials) by means of screen printing. The substrates
are conveyed by tables with single drive units. With the use of optional accessories,
the substrate can also be dried or treated with other finishing techniques (e.g.
flocking).
3.
Data
This section details the iQ-Oval CDS technical specifications.
NB: As our policy is one of continuous improvement, we reserve the
right to change specifications without prior notice.
Any other use of the machine than described above may result in
danger to persons or material damage and is therefore forbidden.
