RYZ
FUNCTIONS OF THE MAIN MENU
CURRENT SPEED
The information is always displayed in large electronic digits (see
fi gure), regardless of the function selected or the alarm active.
The information is displayed on screen every 0.5 seconds.
Representation of the current speed data:
Representation in kph (original confi guration): in this case, the
“km/h” logo will be displayed.
Representation in Mph (See “Altering the unit of measurement”
in CONFIGURATION): in this case no logo will be displayed.
TRIP (TD)
This is an automatic onboard partial totaliser.
This function is always displayed in small digits accompanied by
TD.
The data displayed indicates the distance travelled by the machine
expressed either in km or in miles (depending on the measure-
ment unit selected), with a resolution of 0.1 (km or miles).
It is an automatic meter which is activated autonomously by the
fi rst pulse coming from the speed sensor.
The data is not memorised permanently.
The meter associated with this parameter can be zeroed by hol-
ding the button down (in relation toTOD function) for approx. 3
seconds, until the value “000.0” appears. Zeroing this meter also
zeroes the lAP and AVE functions.
If the data exceeds the 999.9 fi gure, the system returns the TD,
LAP and Ave to zero and begins to count again.
AUTOMATIC CHRONOMETER (LAP)
This is the chronometer related to the TD and AVE.
The information is displayed in small digits and accompanied with
LAP.
The data represents the real time of the distance covered by the
machine associated with the TD parameter (in the mm:ss format if
the hour=0, and in the hh:mm format if the hour>0).
It is an automatic meter:
It is activated autonomously by the fi rst pulse coming from the
speed sensor.
When LAP is operative, the digit separating the hours from mi-
nutes or minutes from seconds is displayed fl ashing, whereas
it is unfl ashing when LAP is not operative.
1)
2)
1)
2)
6-6 ELECTRICAL SYSTEM
6
CAUTION:
When there is no current present, the TD value will be
irremediably lost.
Содержание RYZ 50 Cross C
