MGP DMC 2000 S, Руководство пользователя, Страница: 50 / 65

DMC 2000S Dosimeter
15-00007 Page 50 of 65
9. Other functions
9.1 Emergency start-up
The DMC 2000S dosimeter’s start-up functionality can be accomplished using a
simplified and quick procedure.
For this function, the “
emergency start-up ” operating mode must be enabled (refer to the
section Setting operating parameters , section “Emergency start-up” , page 43).
When the “
emergency start-up ” operating mode is enabled, the following message is
continuously displayed:
Simply pressing once on the selector button immediately switches the DMC 2000S
dosimeter to the
measurement mode:
The following message is displayed briefly:
then the dosimeter switches to the
measurement mode:
!
the “functional indicator” is flashing
!
the display indicates the value of the dose
Note : as soon as the dosimeter switches back to the pause mode, the “ emergency start-
up ” operating mode is disabled. To enable this mode again, the parameters must also be
set again. (Refer to the section Setting operating parameters , section “Emergency start-
up”, page 43).