MGI Navigator G800, Инструкция по эксплуатации и обслуживанию

Страница: 7 / 26

13. MGI Service Schedule
It is the owner
’s responsibility to ensure that all periodical checks, necessary adjustments and
services are carried out. If in doubt please contact the MGI service centre on 1300 644 523.
Any work performed on your buggy should be recorded on your service record (see page 5)
regardless of the work.
BO = Buggy owner can carry out this work
SC = Charged work to be carried by approved service centre
BO/SC = The six monthly service can be completed by either an authorised service centre or
the owner of the buggy.
4
Navigator G800 Monthly 6 Monthly Yearly 3 Yearly
Wipe down the buggy with warm cloth
after each use BO
Clean 4th wheel BO
Lubricate rear wheel stub axles BO
Check and tighten all nuts and bolts SC
Check grub screws on bearing collars on
axle bearings - tighten as required SC
Check and tighten handle pivots SC
Check alignment of buggy - ensure that it
runs straight SC
Replace stem cable SC
Replace seat bracket & sand bottle loop
plastic inserts BO/SC
Replace rear and front wheels BO
Replace 4th Wheel Assembly BO
Replace Upper & Lower Bag Straps BO
Replace key mats on top box and remote
control SC
Replace speed control SC
Replace handle grips BO/SC