C
ompressed-air Stapling Plier
Z 23 P
Page:
22
Mod.:
01/2022
ET
Seite 22 von 34 31.01.22 P:\Technik\ZANGEN\Z 23 P\Bedienungsanleitung\Englisch\Manual Z 23 P Pneum en_01_2022.docx
13.9
Check drive depth
Set the stapling device so that the carton is between the discharge (6) and the anvil (5).
Press the anvil (5) against the carton.
Press the trigger (1) through the stroke.
The discharge(6) contacts the carton.
One staples is driven through the carton and bent at the anvil (5).
Check the setting by triggering once on the sample.
Repeat these steps until the desired drive depth has been set.
13.10
Drive staples
WARNING
Risk of injury due to electrical shock.
Before triggering, ensure that no electrical line will be hit.
WARNING
Eye injury or other injury is possible during operation due to flying debris.
Wear safety glasses and appropriate protective clothing during operation.
Observe the applicable worker safety regulations.
WARNING
Loud operating noises can cause hearing damage.
Wear suitable hearing protection.
Observe the applicable noise protection regulations.
Select the lowest possible operating pressure.
WARNING
Risk of injury due to staple slippage or excess drive depth, or due to recoil.
Use the stapling device only for carton materials.
Hold the stapling device securely during the driving process.
