Meyrat 010-21-00-COD, Руководство по сборке

Страница: 5 / 25

Version: 18/10/2016
Filename: NA-MHF-22-COD-E_version3.doc
© Meyrat SA 2017 5 / 25
2 Technical characteristics
2.1 Electric spindle
MHF-22 ER8/60 COD
Item No. 010-21-00-
COD
010-21-50-
COD
010-23-00-
COD
010-23-50-
COD
Min. rotation speed
5'000 min
-1
Max. rotation speed
60'000 min
-1
Continuous power
120 W
Connection
Axial Radial Axial Radial
Type of tool clamp
ER8 - UP
Clamping capacity
ø 0.5 to ø 5.0
Bearing lubrication
Grease
Weight
0.15 to 0.2 kg
Accessories delivered
with the electric spindle
1 clamping nut ESP-ER8MS
1 wrench CSP-E8MS
1 wrench CLE-SW7-SW9
MHF-22 ER8/60 COD
Item No. 010-32-50-COD 010-36-50-COD
Min. rotation speed 5'000 min
-1
Max. rotation speed 60'000 min
-1
Continuous power 120 W
Connection Radial, front connection
Type of tool clamp ER8 - UP
Clamping capacity ø 0.5 to ø 5.0
Bearing lubrication Grease
Weight 0.22 to 0.4 kg
Accessories delivered
with the electric spindle 1 clamping nut ESP-ER8MS
1 wrench CSP-E8MS
1 wrench CLE-MHF22-00
MHF-22 ER8/80 COD
Item No.
010-22-00-
COD
010-22-50-
COD
010-24-00-
COD
010-24-50-
COD
Min. rotation speed 5'000 min
-1
Max. rotation speed 80'000 min
-1
Continuous power 160 W
Connection Axial Radial Axial Radial
Type of tool clamp ER8 - UP
Clamping capacity ø 0.5 to ø 5.0
Bearing lubrication Air-oil
Weight 0.15 to 0.2 kg
Accessories delivered
with the electric spindle 1 clamping nut ESP-ER8MS
1 wrench CSP-E8MS
1 wrench CLE-SW7-SW9
!
ATTENTION! Use only a CFB-MHF500 type converter to drive an MHF-22 electric
spindle. A converter can only power one electric spindle at a time. Non-compliance with
the above indications can cause damage to the spindle and/or the frequency converter.