Meyra Primus 2 3.310 active, Руководство по эксплуатации

Страница: 11 / 20

11
GB
SERVICE
Finish:
The high quality finish ensures an opti-
mum of protection against corrosion. If
the surface finish is damaged by scratch-
es or similar, touch it up with a varnish
pen available from us. Occasional ap-
plication of a light cover of oil to all
moving parts (see also Maintenance In-
structions) will ensure that your wheel-
chair will give you many years of serv-
ice.
A cleaning with a dry cloth is usually suf-
ficient for the maintenance of the
spokes. Use an appropriate brand
name cleaning agent to remove matt
spots or strongly adhering dirt. A thin
Vaseline coating of the spokes will pre-
vent an early matt appearance of the
coating.
Repairs
If any repairs are required, please con-
tact your specialist workshop. Personnel
there are well trained to carry out the
work required.
Customer Service
Should you have any enquiries or need
any assistance, please contact your lo-
cal MEYRA specialized dealer, who has
been trained in our factory in accord-
ance with our guidelines and who can
offer advice, customer service and re-
pairs. We have a dealer network of
approx. 1.500 dealers in germany. In
this way all wishes can be fulfilled.
MAINTENANCE IN-
STRUCTIONS
Checks prior to each use
1. Test brakes for faultless oper-
ation.
– Activate brake lever [11] to the lim-
it. The locked wheels should not be
able to turn under operating condi-
tions. If they can still turn, the brakes
must be repaired by an authorized
specialist workshop.
+
Remark:
Carry out test yourself or with a
helper.
2. Check pressure brakes for
wear.
– Move brake lever to the side.
+
Remark:
Do it yourself or with the aid of a
helper. If you notice any increasing
slackness on the brake lever take
the wheelchair to your authorized
specialist workshop immediately
for repairs. – Danger of accidents!
3. Check tyre pressures.
– Steering wheels:
Standard tyres: 2.5 bar
– Drive wheels:
Standard tyres: 4.0 bar
+
Remark:
Do it yourself or with the aid of a
helper. Use a tyre pressure tester
or, if not available, the 'thumb
press' method or similar (see
'Brakes' section in the 'safety infor-
mation').
4. Check tyre profile.
+
Remark:
Carry out visual check yourself.
If the tyre profile is worn down or if
the tyre is damaged, consult an
authorized specialist workshop for
repairs.