49
SERVICE
MAINTENANCE
Like any other technical product, your
wheelchair also requires maintenance.
The following maintenance instruc-
tions describe in table form the work
that has to be carried out so that you
can enjoy the benefits of your
wheelchair (e.g. road/operating safe-
ty and high kilometric performance)
even after lengthy use.
☞
Note:
Do not clean the wheelchair using
a high-pressure cleaner. – Danger
of short circuit!
Water jets can cause damage to the
electronics and the operating mo-
dule.
CARE
Upholstery and covers
Clean the upholstery and covers with
warm water. In the case of stubborn
soiling, the fabric can be washed with
a standard washing powder for deli-
cate fabrics. Spots can be removed with
a sponge or a soft brush.
☞
Note:
Do not use aggressive cleaning
agents e.g. solvents, or hard brus-
hes etc.
Rinse with clear water and allow to
dry.
Plastic parts
The plastic panels and parts are made
of high-quality plastic. Take care of
these by means of standard plastics
cleaning agents. Always observe the
specific product information.
Finish
The high quality finish ensures an op-
timum of protection against corrosi-
on. If the surface finish is damaged by
scratches or similar, touch it up with a
varnish pen available from us. Occasi-
onal application of a light cover of oil
to all moving parts (see also Mainten-
ance Instructions) will ensure that your
wheelchair will give you many years
of service.
REPAIRS
You can trustingly contact your autho-
rised workshop for any necessary
maintenance. Personnel there are well
trained to carry out the work required.
