43
Transport security
Carry out the following steps when the
wheelchair is located in the transport
vehicle:
– Switch off the wheelchair.
– Put the operating module in a safe
place or replace it on the
wheelchair.
– Stow all disassembled wheelchair
parts in a secure and protected way.
– Secure the wheelchair by way of
elasticated straps.
– Turn the brake release lever forward
as far as possible.
Only fasten the elasticated belts to
parts of the car envisaged for this pur-
pose and to the frame tubes of the
wheelchair!
Only fasten the elasticised straps on
parts of the car designated for this
purpose as well as frame tubes (fig. 55
+ 56) of the wheelchair!
▲
Do not use the armrests, legrests or
the push bar for lashing the
wheelchair. Only use permitted fa-
stening material.
56
55
