Meyra ORTOPEDIA Solero Light 9.072, Руководство по эксплуатации

Страница: 19 / 52

1
2
4
3
19
ARM SUPPORTS
Do not use the arm supports [1] to lift
or carry the multifunction and bearing
wheelchair.
Do not drive without the arm supports.
No not grab between the frame and arm
support. – Danger of squashing!
When the multifunction and bearing
wheelchair is being pushed by an accom-
panying person the user is to place his
hands onto the arm cushions or in his lap
and not at the sides between body and
arm support. – Danger of squashing the
fingers!
During lateral transfer without arm sup-
port, there is a danger of unintentionally
releasing the brake and soiling the clothes
on the drive wheel.
The arm supports [1] are removable [2] and
simultaneously serve as padded arm sup-
port, clothes guard and wind protector.
Removing the arm support
To remove the arm support, loosen the
clamping screw (2) first and then remove
the arm support toward the top [3].
☞
If necessary previously remove the tor-
so support cushion.
☞
Therefore observe chapter
Remov-
ing the torso support
on page 26.
Inserting the arm support
For inserting the arm support, first slide
the arm support as far as possible into the
bracket (4) and then tighten the clamping
screw (2).
☞
Check the locking points!