1
2
3
25
Handrims
Take care that you do not squash your
hands when driving narrow routes, e.g.
building entrances, doorways, etc.. – Dan-
ger of injury to the hands!
Replace damaged handrims immediately
in order to prevent your hands being in-
jured by such handrims and in order to al-
ways have full control of your wheelchair.
After each assembly the locking device is
to be checked by pulling the insert rod to
the side!
Replacement of handrims or modification
of handrim distances should always be
carried out by your specialist workshop.
All handrims are designed for a 15 mm [1]
to 25 mm (standard adjustment) distance to
the drive wheel.
TILT PROTECTION
Insertable tilt protection
The tilt protection [2] can be inserted into
the lower frame tube.
Depress the corresponding spring button
(3) in order to insert/pull out a respective tilt
protection.
☞
The respective spring button (3) must
visibly and audibly loch into the desired
position afterwards!
