1
2
3
4
17
Adjustment of the armrest height
Before loosening the clamping screws
(2) secure the arm support against falling
down with your hand. – Danger of jam-
ming!
The maximum arm support height has
been reached when the marking on the
square tube is visible.
First loosen the clamping screw (1) of the
height stopper before adjusting the height
of the arm support.
Afterwards loosen the clamping screw (2).
☞
Loosen the clamping screws (1)+(2) so
far that no damage to the coating oc-
curs during the adjustment.
Hold the arm support at the desired height
and then tighten the clamping screw (2).
Push the height stopper (3) down to the
stop and tighten the clamping screw (1).
☞
If necessary the clothes guard can
be adjusted to the new arm support
height by the specialist dealer.
Depth adjustment of the arm
support cushions
To adjust the arms support cushion accord-
ing to the seat depth, loosen the respective
clamping screw (4).
☞
After the adjustment by sliding the arm
support cushions, retighten the respec-
tive clamping screws (4).
Repositioning the arm support cushion
After the required depth adjustment the
arm support cushion can be displaced by
two further positions.
To displace the arm support cushion un-
screw the respective clamping screw (4).
☞
After displacement of the arm support
cushions, reinsert and tighten the re-
spective clamping screws (4).
